The Finest Art of Plaster & Stucco
The production and processing of stucco includes the drawing of profiles and cornices, the record (of course, the duplication of ornaments, brackets, figures, etc.) of plaster casts, and application work.
Stucco facades are a combination of (usually paint plaster, possibly with grooves and bosses) and are drawn from the stucco, moulded or plotted by private treaty. The solid stucco should be taken on the ground in lime mortar, which is necessary for large cornices, a substructure of expanded metal. A preparation of plaster Stuckgesimsen / Stucco Cornices is not due to strong cracking sense. Likewise, moulded parts are made of lime mortar. But this is for large and heavily undercut piece parts very difficult.
At all times, provided a popular piece of architectural jewelry. Particular, the ceilings were suitable as a closed and highly visible area for its application. When a high diversity of this work can be found in the stucco. Raw materials as plaster of Paris or gypsum lime mortar is used. A stucco ceiling in the old building is usually from a peripheral Stuckgesims / Stucco Cornices that is set either as a prefabricated unit or is taken in larger cornices on the spot. The cornice can be either profiled or ornamented. In the middle of the room there is a rose. In villas, castles and historic buildings, the larger interior stucco work are often very ornate. The design was and is still the limit. They range from ornaments freehanded be transmitted to domes and vaults with and without Stuckgesimsen / Cornices. Pulling work One of the most work done in the execution of stucco is the drawing and making profiles and cornices. A distinction between pulling work on the table and pulling work on the spot, again divided into Gesimszüge for indoor and outdoor use. Before a cornice is pulled, it created a profile or an existing profile to be signed off the original. Then, the template will be built. Depending on the type and design of the stucco work, there are several types of templates.